Gigabyte GV-RX60P128D User Manual page 8

4. Locate the PCI Express x 16 slot. If
necessary, remove the metal cover from
this slot; then align your graphics card with
the PCI Express x 16 slot, and press it in
firmly until the card is fully seated.
5. Replace the screw to fasten the card in
place, and replace the computer cover.
6. Plug the display cable into your card; then
turn on the computer and monitor. If your
graphics card came with a DVI connector,
you can connect a flat panel display to the
appropriate connector, as shown below...
To VGA Monitor
To Flat Panel Display
You are now ready to proceed with the installation of the graphics card drivers. Please
refer to next chapter for detailed instructions.
GV-RX60P128D(DE) Graphics Accelerator
To TV or VCR
- 8 -