Fujitsu F2 MC-8FX Family Operation Manual page 6

4. Notes on Designing
■ Notes on designing printed circuit board for the user system
When the header board is connected to the user system, some part mounted around the NQPACK in
the user system may be contacting the header board if the height of the part is tall. To prevent this,
design the printed circuit board for the user system so that the components do not exceed the height
shown in Figure 2. Figure 2 shows the dimension figure of the header board.
U1:
CN3:
CN1/CN2:
*1 : The height differs slightly depending on how the YQPACK and NQPACK are engaged.
*2 : Japan Aviation Electronics Industry, Limited
40.0 mm
30.0 mm
User system I/F connector
Incorrect insertion prevention socket
MCU board I/F connector
Figure 2 Header Board Dimensions
PCW-1-1-1PW
:MAC EIGHT
WR-120SB-VF-N1 : JAE *
WR-120SB-VF-N1 : JAE *
YQPACK052SB
:Tokyo Eletech Corporation
NQPACK052SB
:Tokyo Eletech Corporation
2
2
3