Power Distribution Units (Only For Regions Other Than Emea&I); Figure 1.26 Power Distribution Unit (Ac200-240V, 1U, Max 2 Enclosures Connection); Table 1.8 Power Distribution Unit (Ac200-240V, 1U, Max 2 Enclosures Connection) And Provided Ac Cable Specifications - Fujitsu ETERNUS DX60 S2 User Manual

Chapter 1 Hardware Configurations
1.5 Power Distribution Units (Only for Regions Other than EMEA&I)
1.5 Power Distribution Units (Only for Regions Other than
EMEA&I)
There are two sizes for power distribution units: 1U and 2U.
A power distribution unit is an option to connect power supply units to power outlets when power
sockets are limited.
■
Power distribution unit for DX60 S2 (AC200-240V, 1U, Max 2 enclosures connection)
There are four outlets and two inlets.

Figure 1.26 Power distribution unit (AC200-240V, 1U, Max 2 enclosures connection)

The following table shows the specifications of a power distribution unit and the AC cables that
are provided.
Table 1.8
Power
Input cable
Output cable
ETERNUS DX60 S2 Disk storage system User's Guide -Site Planning-
Power distribution unit (AC200-240V, 1U, Max 2 enclosures connection) and
provided AC cable specifications
Item
Voltage
Phase
Frequency
Connection type
Length
Quantity
Connection type
Length
Quantity
23
Copyright 2012 FUJITSU LIMITED
Outlets (OUTPUT)
Inlets (INPUT)
Specifications
AC200 - 240V
Single
50Hz/60Hz
IEC60320-C13 ↔ NEMA L6-15P
4m
2
IEC60320-C13 ↔ IEC60320-C14
3m
4
P3AM-5492-04ENZ0