Multitech MultiModem II BA-Series User Manual page 46

MultiModemBA User Guide
EXECUTE
LINE
PROBE
COMMANDS
(2834 Series only)
READ AND
ASSIGN
S-REGISTER
VALUES
REMOTE
CONFIGURATION
& CALLBACK
SECURITY
TEST MODEM
46
%DF Format Line Probe Display (Graph or Table Format)
%DP Enable/Disable Reading Line Probe From DSP during handshake
L9 Display of Signal Strength Information
L10 Display Signal to Noise Ratio (SNR)
L11 Display of Noise Information
&RP Initiates Retrain to Read Line Probe Parameters
Sr? Read Current S-Register Value
Sr= Assign S-Register Value
#CBN Passwords for Callback Phone Numbers
#DB Callback Security Enable/Disable
#I Change LOGIN Password
#RCBNxx Erase Password Linked with Memory Location xx
#S Change SETUP Password
U Self-Test Modem (Chapter 8)
&T Enable/Disable Digital Loopback Signal