Sample Code - Fujitsu MB9B500 Series User Manual

4 Sample Code

The sample codes for FSSDC-9B596-EV board are listed as following table.
Project Name
ext_bus_nandflash
uart
can
rtc
usb_function_mose
usb_host_catch_mouse
lcd_ad_key
Notes:
1) It provides both IAR and Keil project for these sample code, IAR project is
developed in EWARM Embedded Workbench V6102, and Keil project is developed
in Keil uVision 4.20.
2) If user use other version to open these projects, compiling error may occur, in this
case, please check following setting.
IAR IDE
MCU type
Pre-included file
ICF file
Flash loader
Keil IDE
MCU type
Pre-included file
ROM & RAM memory address
Description
Use external bus to access Nand Flash
Use UART to communicate with PC
Implement CAN communication between 2
CAN nodes
Use IIC to access RTC module
Implement the USB mouse to demonstrate
USB function
Identify a USB mouse and print the mouse
position on debug window
Display ad value and key status on LCD
13