FujiFilm X-Pro1 Owner's Manual page 120

Problems and Solutions
Problem Problem
The fl ash does not fully The fl ash does not fully
light the subject. light the subject.
Pictures are blurred. Pictures are blurred.
Pictures are mottled. Pictures are mottled.
Playback
Problem Problem
Pictures are grainy. Pictures are grainy.
Playback zoom is unavail- Playback zoom is unavail-
able. able.
No sound in movie No sound in movie
playback. playback.
Selected pictures are not Selected pictures are not
deleted. deleted.
File numbering is unex- File numbering is unex-
pectedly reset. pectedly reset.
104
• • The subject is not in range of the fl ash The subject is not in range of the fl ash: Position the subject in range of the fl ash.
• • The fl ash window is obstructed The fl ash window is obstructed: Hold the camera correctly.
Shutter speed is faster than 1 1
• • Shutter speed is faster than
• • The lens is dirty The lens is dirty: Clean the lens ( : Clean the lens (P
• • The lens is blocked The lens is blocked: Keep objects away from the lens. : Keep objects away from the lens.
• • s s is displayed during shooting and the focus frame is displayed in red
is displayed during shooting and the focus frame is displayed in red: Check focus before shooting (
• • k k is displayed during shooting
is displayed during shooting: Use the fl ash or mount the camera on a tripod (
• • Shutter speed is slow and the ambient temperature is high Shutter speed is slow and the ambient temperature is high: This is normal and does not indicate a malfunction.
• • The camera has been used continuously at high temperatures or a temperature warning is displayed The camera has been used continuously at high temperatures or a temperature warning is displayed: Turn the cam-
era off and wait for it to cool down. era off and wait for it to cool down.
The pictures were taken with a diff erent make or model of camera. The pictures were taken with a diff erent make or model of camera.
The pictures were created using O
The pictures were created using
• • Playback volume is too low Playback volume is too low: Adjust playback volume ( : Adjust playback volume (P
• • The microphone was obstructed The microphone was obstructed: Hold the camera correctly during recording (
• • The speaker is obstructed The speaker is obstructed: Hold the camera correctly during playback ( : Hold the camera correctly during playback (P
• • The camera is in silent mode The camera is in silent mode: Turn silent mode off (
Some of the pictures selected for deletion are protected. Remove protection using the device with which it was Some of the pictures selected for deletion are protected. Remove protection using the device with which it was
P 75).
originally applied ( originally applied (P 75).
The battery-chamber cover was opened while the camera was on. Turn the camera off before opening the bat- The battery-chamber cover was opened while the camera was on. Turn the camera off before opening the bat-
P 13, 17).
tery-chamber cover (P tery-chamber cover ( 13, 17).
Solution Solution
: Position the subject in range of the fl ash.
: Hold the camera correctly.
/ / 180 180 s s: Choose a slower shutter speed (
: Choose a slower shutter speed (P
P xi). xi).
: Use the fl ash or mount the camera on a tripod (P
Solution Solution
O RESIZE
RESIZE or with a diff erent make or model of camera. or with a diff erent make or model of camera.
P 78).
78).
: Hold the camera correctly during recording (P
P 30, 80).
: Turn silent mode off (P 30, 80).
P 25, 27).
25, 27).
: Check focus before shooting (P
P 54).
54).
: This is normal and does not indicate a malfunction.
P 2, 39).
2, 39).
P 2, 59). 2, 59).
P 30).
30).
: Turn the cam-