Blu-Ray Discs - FujiFilm DATA STORAGE MEDIA Product Manual

Table of Contents

Advertisement

28
Blu-ray Disk
BD-R/RE
FUJIFILM BD-R- and BD-RE-Discs for Video and Data - the true beginning of Blu-ray
The concept behind Blu-ray format is to be able to record a two-hour high-definition
(HD) broadcast on a single-sided, single-layer disc. HD video contains about six times
the number of pixels of standard-definition (SD) video. A disc capacity of about 22 GB
is needed to store this amount of HD video. Both the BD-R and the BD-RE formats have
a standard capacity of 25 GB to ensure they can hold two hours worth of HD program-
ming. The high-performance recording layer used in FUJIFILM's BD-R/RE discs en-
sures wide power margins. This means you can make accurate recordings even from
a weaker laser.
Blu-ray Mini-Lesson: Disc structure
Line-up
BD-R 25 GB, 1-2x, Recordable
Inorganic recording layer
Hard-coat layer
Available in 5-pack jewel case
Specifications and appearance are subject to change without notice.
BD-RE 25 GB, 1-2x, Rewritable
Inorganic phase-change recording layer
Hard-coat layer
Available in 5-pack jewel case
Labelflash™ DVD Disk
DVD-R/+R
Labelflash™
A new Labeling Technology that doesn't need an Inkjet Printer
Labelflash™ DVD discs have a specialized dye layer located 0.6 millimeters below the
surface of the labeling (non-data) side. This specialized dye allows you to label your
DVD with high-resolution pictures and text using the recording laser of Labelflash™-
compliant DVD writer*. Get customized DVDs without an inkjet printer.
*Both a Labelflash™-compliant DVD writer and a Labelflash™ DVD disc are required to burn pictures.
DVD-R/+R 4.7 GB/120 min., for Video and Data
Write-once format DVD
Newly developed imaging dye for sophisticated, high-contrast pictures
Applications: multimedia applications, high volume data recording, archiving
and playback
Add pictures, graphics and text to your discs without using an Inkjet Printer
All you need to make pictures is a Labelflash™-compliant DVD writer. No printers or
consumables are required. This means you can both record your data and create your
label with a single Labelflash™-compliant DVD writer.
Write your data on the
Eject the disc, flip it over
recording side of the
so the labeling side
disc.
faces down, and pop it
back in the burner.
Further information about Labelflash™ see under www.Labelflash.eu
Line-up
DVD-R and DVD+R are available in 5-pack jewel case and cake box with 10 pcs.
Specifications and appearance are subject to change without notice.
Labelflash™ is a trademark of the Yamaha Corporation.
(Sample Image)
Burn your image on
The imaging dye layer
the labeling side.
is located 0.6 millime-
ters below the surface
of the labeling side.
Images last longer
since they cannot be
touched directly.
29

Advertisement

Table of Contents
loading

Table of Contents