Freecom BLU-RAY COMBO PRO User Manual page 7

Note: You can plug the USB cable into your computer and unplug it while
the computer is running ("hot plug & play"). Remove the cable from the
computer when doing so, never remove the cable from the drive when
the computer is on.
For optimal performance, the Freecom Blu-ray Rewriter Pro / Blu-ray
Combo Pro should always be connected to a USB .0/Firewire port.
1. Power Switch
The Freecom Blu-ray Rewriter Pro / Blu-ray Combo Pro is always powered, even if the
USB/Firewire cable is disconnected from your computer. Therefore, please turn off the
Freecom Blu-ray Rewriter Pro / Blu-ray Combo Pro if it is not used. The power switch is
on the back side of the Freecom Blu-ray Rewriter Pro / Blu-ray Combo Pro.
Attention! Before switching off the Freecom Blu-ray Rewriter Pro / Blu-ray
Combo Pro manually, make sure to safely remove the Freecom Blu-ray
Rewriter Pro / Blu-ray Combo Pro via your operating system (the „unplug
or eject hardware" option in the Windows taskbar). Failing to do so may
result in loss of data.
Start Up
EN
1
7