How To Adjust A Setting - AOC LM914 User Manual

HOW TO ADJUST A SETTING

1. Press the MENU-button to activate the OSD window. See figure 5.
2. Press or
3. Press the MENU-button again to activate the highlighted function.
4. Press or
Note: is used to adjust the function down &
function up. This is due to the orientation of the adjustment level bar.
5. When the OSD window is active, it shows the input signal timing. The "H"
stands for the horizontal frequency and "V" for the vertical frequency.
6. To exit and save, select the exit function, or leave the monitor alone for 10
seconds. If you want to adjust another function press MENU again and
repeat steps 2-4.
to select the desired function. See figure 5.
to adjust the selected function.
Figure 5 The OSD Message
13
LM914
is used to adjust the