Gigabyte GV-RX195P256D-RH Manual page 10

How to enable the ATI CrossFire
Step 1:
Install two CrossFire graphics cards of the same chipset on a CrossFire
TM
connect the graphics cards via two CrossFire
enable the CrossFire technology simply through the graphics card driver.
TM
Two CrossFire bridge
TM
interconnect cables.
Step 2:
After installing graphics card driver in operating system, access the ATI CATALYST Control Center
(please refer to Page 19). From the ATI CATALYST Control Center, enter the CrossFire
assure to select the Enable CrossFire checkbox (Figure 2).
Step 3:
When the next confirmation dialog box appears (Figure 3), click Yes to complete the CrossFire
configurations.
Figure 2
(Note) Only Windows XP operating system supports CrossFire
®
CrossFire in Windows
TM
GV-RX195P256D-RH Graphics Accelerator
technology
TM
bridge interconnect cables (Figure 1). Then users can
TM
Figure 1
2000.
®
- 8 -
:
(Note 1)
-supported motherboard and
TM
Two CrossFire graphics cards of the same type.
TM
(Example: GV-RX195P256D-RH)
Figure 3
mode. Please do not enable
TM
menu and
TM
TM