Table of Contents
Advertisement
4. Troubleshooting Tips
The following troubleshooting tips may help if you experience problems. Contact your dealer
or Gigabyte for more advanced troubleshooting information.
Check that the card is seated properly in the
Ensure that the display cable is securely fastened to the card's display connector.
Make sure that the monitor and computer are plugged in and receiving power.
If necessary, disable any built-in graphics capabilities on your motherboard. For
more information, consult your computer's manual or manufacturer.
(NOTE: Some manufacturers do not allow the built-in graphics to be disabled or to
become the secondary display.)
Make sure you selected the appropriate display device and graphics card when you
installed the graphics driver.
Restart your computer. Press the F8 key on your keyboard after system starts up.
When the Windows Advanced Options Menu appears, select Safe Mode and press
Enter. After getting into Safe Mode, in Device Manager check whether the driver for
the graphics card is correct.
For more assistance, use the Troubleshooting Guide located in the Windows
contact your computer manufacturer.
If necessary, adjust your monitor's setting by monitor's adjust panel to make the screen
looks focused, crisp, and sharp. (Please refer to the monitor's manual.)
GV-RX105512P8-RH Graphics Accelerator
PCI Express x16
- 36 -
slot.
Help or
®
Advertisement
Table of Contents
