Chapter 1 Getting Started; Unpacking; Checking The Parts List; Components Of Internal-Mount Model (Ls-10) - Nikon COOLSCAN LS-10E Instruction Manual

4
~lhliID[lilU®1f
11
I
Getting Started
1-1 Unpacking
Care should be exercised when unpacking the scanner.
Follow the instructions below before beginning the
installation procedure.
1. Remove all packaging materials from the scanner
and the interface kit.
2. Check for damage while unpacking the scanner. If
you notice any damage, notify the dealer or the
Nikon sales office where you purchased the scanner.
3. Save all shipping and packaging materials in case
you want to ship the scanner in the future .
1-2 Checking the Parts List
Each scanner package, whether internal or external ,
includes all of the necessary hardware, software,
documentation and cabling to get you to started
scanning film . Check the components in the
LS-101
LS-10E packaging against the following parts list to
insure that you have unpacked all contents.
1-3 Components of Internal-mount
Model (LS-10)
The internal scanner package contains the following
items:
1. Scanner LS-10
2. Strip film holder FH-1
3. SCSI 50-pin flat cable IS-1
4. DC power cable IW-1
5. Internal mounting kit IP-1
6. Utility software for MS-Windows
7. User's manual