Connecting Your Dvd Player To The Tv; If You Want The Best Connection With Hdmi - Sceptre X46 User Manual

Connecting Your DVD
Player to the TV
If You Want the Best Connection
with HDMI...
1. Make sure the power of X46 LCD HDTV and your DVD player is turned
off.
2. Connect a HDMI cable to the HDMI port of your DVD player and the
other end to the HDMI port off the back of your X46 LCD HDTV.
3. Turn on the X46 LCD HDTV and your DVD player.
4. Use the remote control's source button or the source button on the right
side of the TV to switch to HDMI 1.
Please Note :
•
•
•
•
•
Please reference the DVD player's manual as well, to make sure the
DVD player is configured to output correctly to the TV.
This TV does not decode Bitstream digital audio, therefore you'll need to
make sure your DVD is setup for PCM digital audio through HDMI.
If HDMI 1 is already occupied, please use HDMI 2 as your connection
port and switch source to HDMI 2.
You can also use HDMI 3 on the side of the TV as an alternative as well.
This TV will turn off automatically if there's no signal present for more
than 15 minutes.
www.SCEPTRE.com
SCEPTRE X46 HDTV User Manual
- 29 -