Easy Menu; A Uto Keystone - Hitachi CP-WUX645N Operating Manual

EASY MENU

From the EASY MENU, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons on the
projector or remote control. Then perform it according to
the following table.
Item
ASPECT
AUTO
KEYSTONE
EXECUTE
KEYSTONE
KEYSTONE
PERFECT FIT
PICTURE MODE
(continued on next page)
Using the ◄/► buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE Menu (32).
Using the ► button executes the auto keystone function.
See the AUTO KEYSTONE
Using the ◄/► buttons corrects the vertical keystone distortion.
See the KEYSTONE
Using the ◄/► buttons corrects the horizontal keystone distortion.
See the KEYSTONE
Using the ► button displays the dialog for the shape adjustment of
the projected image in each of the corners.
See the PERFECT FIT item in SETUP menu
Using the ◄/► buttons switches the picture mode.
The picture modes are combinations of GAMMA and COLOR
TEMP settings. Choose a suitable mode according to the projected
source.
NORMAL ó CINEMA ó DYNAMIC ó BOARD(BLACK)
DAYTIME ó WHITEBOARD ó BOARD(GREEN)
NORMAL
CINEMA
DYNAMIC
BOARD(BLACK)
BOARD(GREEN)
WHITEBOARD
DAYTIME
• When the combination of GAMMA and COLOR TEMP differs
from pre-assigned modes above, the display on the menu for the
PICTURE MODE is "CUSTOM". Please refer to the GAMMA and
COLOR TEMP (29, 30) items in PICTURE Menu.
• When this function is performed, a certain extra such as a line may appear.
Description
EXECUTE item in SETUP Menu (38).
item in SETUP Menu (38).
item in SETUP Menu (39).
COLOR TEMP
#2 MID
#3 LOW
#1 HIGH
#4 Hi-BRIGHT-1
#5 Hi-BRIGHT-2
#2 MID
#6 Hi-BRIGHT-3
27
EASY MENU
(39).
GAMMA
#1 DEFAULT
#2 DEFAULT
#3 DEFAULT
#4 DEFAULT
#4 DEFAULT
#5 DEFAULT
#6 DEFAULT