Magic Remote Control Functions - LG 60PN6500 Owner's Manual

28

MAGIC REMOTE CONTROL FUNCTIONS

MAGIC REMOTE CONTROL FUNCTIONS
When the message "Magic remote control battery is low. Change the battery." is displayed,
replace the battery. To install batteries, open the battery cover, replace batteries (1.5 V AA)
matching and ends to the label inside the compartment, and close the battery cover. Be
sure to point the remote control at the remote control sensor on the TV. To remove the batteries,
perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this may damage the remote control.
y
This remote uses infrared light. When in use, it should be pointed in the direction of the TV's remote sensor.
Selects menus or options and confirms
Scrolls through the saved channels.
If you press the navigation button while
moving the pointer on the screen, the
pointer disappears, and the Magic remote
control works as a regular remote control.
To display the pointer again, shake the
Magic remote control from side to side.
Returns to the previous level.
Voice recognition
-This is a beta version and only available in
selected functions for supported models.
-Network connection is required to use the
voice recognition function.
1. Press the Voice recognition button.
2. Speak slowly and precisely.
When a voice is recognized, the processing
message appears on the screen.
• Use the magic remote control no further
than 10 cm from your face.
Used for viewing 3D video.
Pointer (RF transmitter)
Wheel (OK)
your input.
BACK
BACK
VOL
(POWER)
Turns the TV on or off.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
SMART
Accesses the Smart Home menu.
SMART
/Q.MENU
/Q.MENU
Accesses the Universal Control.
Accesses the quick menu.
CH
VOL
Adjusts the volume level.
CH
Scrolls through the saved channels.
(MUTE)
Mutes all sounds.