Yamaha Tyros4 Connection Manual page 9

8
Press the [F](YES) button, then within 2 minutes hold down the WPS button of the access
point with router.
For details about the operations in the setting of the access point on the router side, read the owner's manual
for the product you are using.
Proceed to step 13.
9
Use the [DATA ENTRY] dial to select the desired access point, then press the [G] button to
proceed to "NEXT."
The SSID, channel and security format of the selected access point are automatically set. An access point that
is security-enabled is displayed with a padlock icon "
same as those for the access point on the router side.
NOTE
• For details on confirmation and changes in the setting of the access point on the router side, refer to the owner's manual for the product you
are using.
With padlock icon "
Since the security is set to your access point with router, proceed to step 10, then input the key.
No padlock icon
If your access point with router has not been security-enabled, you don't need to make a setting for the wireless LAN. Pro-
ceed to step 13 on page
with router.
NEXT PAGE
Signal
strength
"
11. If you want to set the security to the access point, change this in the settings of your access point
," Input the key. Make sure that the settings are the
The signal strength may not be displayed
depending on the particular USB wireless
LAN adaptor you are using.
Connection
9
Internet Connection Guide