Assembly - Craftsman 917.249121 Owner's Manual

ASSEMBLY
i
PARTS IDENTIFICATION
COVER
UPPER CHUTE
FULL
BAGGER
INDICATOR
GRASS
CATCHER
CONTAINERS
CHUTE LATCH
LOWER CHUTE LOWER CHUTE
ATTACHING
WING NUT
NOTE: WHEN RIGHT HAND (R.H.) AND LEFT HAND (LH.) ARE MENTIONED IN THIS MANUAL, IT MEANS WHEN YOU
ARE SEATED ON THE TRACTOR, IN THE OPERATOR'S POSITION.
THESE ARE THE TOOLS YOU WILL NEED TO
ASSEMBLE YOUR GRASS CATCHER:
(1) 3/8" Wrench
(1) 1/2"Wrench
(2) 9/16" Wrenches
(1) 1/2" Socket
(1) 9/16" Deep well Socket
(1) DriveRatchet
(1) 3"or longer Extension
(1) ShortHandle
Phillips Screwdriver
A
CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:
Depress clutch/brake pedal fully and set parking brake.
Place gearshift/motion control lever In "NEUTRAL" position.
Place attachment clutch in "DISENGAGED" position.
Turn ignition key "OFF" and remove key.
Make sure the blade and all moving parts have completely stopped.
Disconnect spark plug wire from spark plug and place wire where Itcannot come In contact
with plug.