Download Print this page

Craftsman 917.388910 Owner's Manual page 8

Rotary lawn mower 6.75 horsepower 21" multi-cut

Advertisement

Available languages

Available languages

The operationof any lawn
mowercan result in foreign
objectsthrown into the
eyes, which can result in
severeeye damage.Always
wearsafety glasses or eye shields while
operatingyour lawn moweror performing
any adjustmentsor repairs.We recom-
menda standard safetyglasses or wide
vision safety mask worn over spectacles.
HOWTO
USEYOUR
LAWN MOWER
ENGINE SPEED
The engine speed was set at the factory
for optimum performance. Speed is not
adjustable.
ENGINE ZONE CONTROL
• i,CAUTION:
Federal regulations require
an engine control to be installed on this
lawn mower in order to minimize the
risk of blade contact injury. Do not under
any circumstances
attempt to defeat the
function of the operator control. The blade
turns when the engine is running.
• Your lawn mower is equipped with an
operator presence control bar which
requires the operator to be positioned
behind the lawn mower handle to start
and operate the lawn mower.
TO ADJUST CUTTING HEIGHT
Raise wheels for low cut and lower wheels
for high cut, adjust cutting height to suit
your requirements. Medium position is
best for most lawns.
To change cutting height, squeeze ad-
juster lever toward wheel. Move wheel
up or down to suit your requirements.
Be sure all wheels are in the same set-
ting.
NOTE: Adjuster is properly positioned
when plate tab inserts into hole in lever.
Also, 9-position adjusters (if so equipped)
allow lever to be positioned between the
plate tabs.
LEVER BACKWARD
Plate tab
TO LOWER MOWER
LEVER FORWARDTO
RAISE MOWER
Lever
TO CONVERT
MOWER
Your lawn mower was shipped ready to be
used as a mulcher. To convert to bagging
or discharging:
8
REAR BAGGING
• Lift rear door of the lawn mower and
place the grass catcher
frame
hooks
onto the door pivot pins.
• To convert
to mulching
or discharging
operation,
remove
grass catcher
and
close
rear door.
Rear
Grass
="--'-door
catcher
handle
Catcher frame hook
SIDE DISCHARGING
• Rear door must be closed.
• Open mulcher door and install dis-
charge deflector under door as shown.
• Mower is now ready for discharging
operation.
• To convert to mulching or bagging opera-
tion, discharge deflector must be removed
and mulcher door must be closed.
'Open mulcher door
Discharge
deflector

Advertisement

loading