Table of Contents
Advertisement
Display Properties:
If your VGA card is equipped with a S-Video connector, you can use a second output
device (e.q. a TV or a computer monitor) as part of your operating desktop extending
your desktop to second device or copying your desktop on the second device.
Connecting your graphics card to a TV or VCR
To connect your graphics card to a TV (or VCR), use an S-Video cable. However, most TVs (and
VCRs) have a Composite video input, in which case you can use the supplied S-Video-to-Com-
posite video adapter.
1. Turn off your computer and your television (or VCR).
2. Ensure your graphics card was installed correctly. (For information about placing the card in
your computer and installing the enhanced graphics driver, see the user's manual.)
3. Determine if your television (or VCR) has an S-Video or Composite video connection.
4. Looking at the back of your computer, locate your S-Video Out. Using an S-Video cable or the
supplied adapter cable, attach one end of the cable to your graphics card and the other to your
television (or VCR).
5. Turn on your television (or VCR) then your computer.
Select Display Type
Enable / Disable "Extend my windows
desktop onto this monitor"
The Display tab provides the multi monitor features. Here
you can enable/disable display devices and swap the
assignment of Primary and Secondary displays.
- 29 -
Software Installation
Advertisement
Table of Contents
