Table of Contents
Advertisement
3.2. Win
98/98SE / Win
®
Please make sure the Windows 2000 have installed Windows
2 (or later) before installing the graphics accelerator driver.
With Windows
2000 running on your computer, you need to install the GV-R96S128D
®
driver to take advantage of the higher performance, resolutions, and special graphic features
of the Graphics card. To ensure you install the latest driver, use the Installation CD that
shipped with your GV-R96S128D Graphics card.
To install the GV-R96S128D driver for Win
(if it does not show up, run following steps)
1. Insert the INSTALLATION CD into your CD-ROM drive. If Windows
automatically.
2. Click Start.
3. Select Run.
4. Type the following:
D:\SETUP
(If D is not your CD-ROM drive, substitute D with the correct drive letter.)
5. Click "OK".
6. Click on "Install Display Drivers(Radeon 9600 Series)" to begin the Installation
Wizard.
7. Click "Next".
8. Click "Yes" to the license agreement.
9. Follow the Wizard's on-screen instructions to complete the installation.
3.3. BIOS FLASH UTILITY
BIOS update procedure:
MNote: Please download the newest BIOS from our website (www.gigabyte.com.tw)
or contact your local dealer for the file.
MIf you want to realize the BIOS flash information, please refer to detail on page 32.
GV-R96S128D Graphics Accelerator
2000 / Win
ME DRIVER INSTALLATION
®
®
98/98SE / Win
®
- 30 -
2000 Service Pack version
®
2000 / Win
ME
®
®
runs the CD
®
Advertisement
Table of Contents
