Table of Contents
Advertisement
ESR-9710 Wireless N Gigabit Router
6.5 Status
6.5.1 Wireless Status
Click on the Wireless link in the navigation menu. The wireless section allows you to
view the wireless clients that are connected to the device.
MAC Address: The Ethernet ID (MAC address) of the wireless client.
IP Address: The LAN-side IP address of the client.
Mode: The transmission standard being used by the client. Values are 11a, 11b, 11g,
or 11n for 802.11a, 802.11b, 802.11g, or 802.11n respectively.
Rate: The actual transmission rate of the client in megabits per second.
Signal: This is a relative measure of signal quality. The value is expressed as a
percentage of theoretical best quality. Signal quality can be reduced by distance, by
interference from other radio-frequency sources (such as cordless telephones or
neighboring wireless networks), and by obstacles between the router and the
wireless device.
6.5.2 Logs Status
Click on the Logs link in the navigation menu. The router automatically logs (records)
events of possible interest in its internal memory. If there is not enough internal
memory for all events, logs of older events are deleted, but logs of the latest events
are retained. The Logs option allows you to view the router logs. You can define what
types of events you want to view and the level of events to view. This router also has
Click on the Status link on the navigation
drop-down menu. You will then see six options:
Wireless, Logs, Statistics, WISH Sessions,
Routing,
and
Internet
configuration steps for each option are
described below.
Version 1.0
Sessions.
The
73
Advertisement
Table of Contents
