Craftsman 113.178060 Owner's Manual page 5

PUSH
DOWN
4.Turn lid assembly upright and put the lid
assembly on the dust drum by lining up the
vacuuming opening of the top with the drain of
the dust drum and push down on both handles at
once. Make su re that the locking tabs are snapped
in p!lace to prevent the lid from coming off.
5. Put one end of the swivel hose into the vacuuming
opening directly above the drain. Take the hose
strap and loop it around the hose about one foot
from the vacuuming opening.
Then put the other end of the hose strap into the
keyhole slot just under the drain as shown.
When the vac is pulled around by the hose, the
strap between the drum and the hose will help the
vac remain easy to handle.
6. Put the nozzle on the other end of the hose and
your Vac is ready to use.
LOOP HOSE
STRAP AROUND
BEFORE
INSERTING IN
KEY HOLE
CONNECT HERE
FOR 2-1/2" HOSE
KEY HOLE
SLOT
5