Craftsman 917.377710 Owner's Manual page 8

TO ADJUSTCUTTINGHEIGHT
All
four wheels are adjusted by a single
lever.
° Pull adjustor lever toward wheel. To
raise mower, move lever forward to
desired position. To lower mower,
move the lever toward the rear.
LOWER
WHEELS
_
FOR HIGH
CUT
Single point
height adjuste
lever
RAISE
WHEELS
FOR LOW
CUT
TO ATTACH GRASS CATCHER
1. Lift the rear door of the lawn mower
and place the grass catcher frame
side hooks into the slots of the rear
door.
2. The grass catcher is secured to the
lawn mower housing when the rear
door is lowered onto the grass catcher
frame.
_kCAUTION: Do not run your lawn
mower without rnulcher plate or plug or
approved grass catcher in place. Never
attempt to operate the lawn mower with
the rear door removed or propped open.
Rear door slots
Grass
catcher
handle
Catcher frame hook
TO EMPTY GRASS CATCHER
1. Lift up on grass catcher using the
frame handle.
2. Remove grass catcher with clippings
from under lawn mower handle.
3. Empty clippings from bag using both
frame handle and bag handle.
NOTE: Do not drag the bag when
emptying; it will cause unnecessary wear.
Grass
frame
handle
Bag
handle
8