Table of Contents
Advertisement
Configuring for AppleTalk Using EpsonNet MacAssist
Use EpsonNet MacAssist to configure the network adapter as
described below.
1. Turn on the printer with the network adapter.
2. Double-click the EpsonNet MacAssist icon.
3. Highlight the printer you want to configure from the list and
click Configuration.
Note:
❏ If you have connected more than one printer to the network, you
can distinguish between the printers by the MAC address on a
status sheet.
❏ You can search printers in other zones just like a computer by
changing the Zone setting in the Option dialog box. See
"EpsonNet MacAssist dialog box" on page 10-18 for more
information.
Settings for Macintosh
7-2
Advertisement
Table of Contents
