Changing The Image Quality; Image Quality And Shooting Time Per Memory Card - Canon PowerShot SX220 HS User Manual

You can choose among 4 different image quality settings.
Choose the image quality setting.
After pressing the @ button, press the
Av buttons or turn the (_!_'dial to choose
_, then press the @ button again.
Choose an option.
............ Press the _'_ buttons or turn the _i[_ dial
to choose an option, then press the'_
button.
The option you set will appear on the
screen.
1920 x 1080 pixels, For shooting full Approx. Approx.
24 frameslsec, high=definition movies. 14 rain. 34 sec. 59 rain. 40 sec.
Approx. Approx.
20 rain. 1 hr. 24 rain.
43 sec. .1 54 seo. .2
The image quality witt
be higher when Approx. Approx.
640 x 480 pixels, compared with _, but 43 min. 43 sec. 2 hr. 59 rain.
30 frames/sec, the recording time witi 3 sec.
be shorter.
Since the file size is Approx. Approx.
[_ 320 x 240 pixels, smalt, shooting time will
30 frames/sec, increase, but the image 1 hr. 58 min. 8 hr. 4 min.
19 sec. 30 sec.
quality witi decrease.
"1 13 min. 35 sec. for iFrame movies (p. 114).
*2 55 min. 38 sec. for iFrame movies (p. 114).
Based on Canon's testing standards.
Recording wilt automatically stop when the clip file size reaches 4 GB, or when the
recording time reaches 29 minutes and 59 seconds when shooting in _ or _, and
approximately 1 hour when shooting in _ or _.
Recording may stop even if the maximum ctip length has not been reached on some
memory cards. SD Speed Class 6 or higher memory cards are recommended.
116