Converting Analog Signals Into Digital Signals (Analog-Digital Converter) - Canon Optura Xi Instruction Manual

Converting Analog Signals into Digital _ []
Signals (Analog.Digital Converter)
By connecting the camcorder to a VCR or 8mm video camcorder, you can convert
analog video/audio signals to digital signals and output the digital signals via the DV
terminal. The DV terminal serves as output terminal only.
H 0 Unload the tape from the camcorder.
0 Turn off all devices before starting the connections.
0 Depending on the signal sent from the connected device, the conversion from
analog to digital signals might not work properly (e.g., signals that include
copyright protective signals or anomalous signals such as ghost signals).
We recommend powering the camcorder from a household power source.
CQnne¢$ing _he Devices .....................................................................................
This illustration shows how to connect using a S-video cable. You can also connect the
yellow plug of the stereo video cable to the VIDEO terminal. Refer also to the
instruction manual of the connected device.
OUTPUT
<_T_ Signal flow _._
_"'ll_::: S-I50 S-videoCable I
_._s,sl,.v,oco
(supp,,ed) ® v,oEo _
_Signal flow _ _
L
/
[ _,_,_ _ F-_'_ "v_"_7
I
_ / / AUDIO _
I "'_ STV-250N StereoVideo j_
--
"_
R
Cable (supplied)
Commercially available DV cable
m
101