Table of Contents
Advertisement
Charging
the Battery
_
Tips for Using
the Battery
and Charger
_ Upon purchase, the battery is not fully charged.
Recharge the battery before using.
®_ Recharge
the battery on the day before or on the day it is to be
used.
Even during storage, a charged battery will gradually drain and lose
its power.
®_After recharging the battery, detach it and unplug the charger
from the power outlet.
®_When not using the camera,
remove the battery.
If the battery is left in the camera for a prolonged period, a small
amount of power current is released, resulting in excess discharge
and shorter battery life. Store the battery with the protective cover
(provided) attached. Storing the battery after it is fully charged can
lower the battery's performance.
®_The battery
charger can also be used in foreign
countries.
The battery charger is compatible with a 100 V AC to 240 V AC 50/
60 Hz power source. If necessary, attach a commercially-available
plug adapter for the respective country or region. Do not attach any
portable voltage transformer to the battery charger. Doing so can
damage the battery charger.
_ If the battery
becomes
exhausted
quickly
even after being fully
charged,
the battery has reached
the end of its service
life.
Purchase a new battery.
I_
_ After disconnecting
the charge;,s power plug, do not touch the prongs for
at least 3 Sec.
_,_ Do not charge any battery other than a Battery Pack LP-E8,
The Battery Pack LP:E8 is dedicated to Canon products on!y. Using it
with an incompat!ble
battery charger or product may result i n malfunction
or accidents for which Canon cannot be held liable.
27
Advertisement
Table of Contents
