Bose Lifestyle DVD Home Entertainment Systems Operating Manual page 31

Menu Item
Display Brightness:
Display Language:
Optical Source:
Optical Input:
Record Out Format:
TV Power:
Send IR Commands:
Receive IR Commands:
Tuner Spacing:
Video Format:
Video Black Level:
Video Output:
Zone 1 Protocol:
Zone 2 Protocol:
System setup menu
The system setup menu contains settings that affect the entire system.
Settings
1 to7
English
TV/AUX/
VCR / TAPE
-6/-3/0/
3/6
Original =
PCM =
Auto =
Manual =
Off=
On =
Off=
On =
USA =
European =
NTSC =
PAL =
Normal =
Extended =
Normal =
YPbPr =
Normal =
Legacy =
Normal =
Legacy =
What each setting does
Determines the brightness level of the media center display (7 = brightest).
Presents on-screen display menus in the selected language.
Assigns the OPTICAL INPUT to one of the four sources.
Adjusts the optical audio input level to match the input from the other sources.
No processing applied for speaker outputs.
Presents mixed-down Pulse Coded Modulation (PCM) on the SPEAKER
ZONES outputs.
Automatically turns on your TV whenever the TV or DVD is selected.
You must turn on your TV separately.
Your system only sends IR commands to control your TV, VCR and AUX
components.
Your system sends IR commands for all remote control functions. This setting
may be useful to teach Bose ® Lifestyle ®remote commands to other IR remote
controls.
IR commands are not received by your system.
IR commands from external equipment are received by your system.
Sets channel spacing for AM/FM radio stations to the USA standard.
Sets channel spacing for AM/FM radio to the European standard.
Sets video format for NTSC monitors.
Sets video format for PAL monitors.
Sets the black level appropriate for most TVs.
Sets a black level that may be preferred for DVD playback on some TVs.
Provides a normal video output for COMPOSITE and S-VIDEO.
Converts video output for 3-signal YPbPr connections (adapter required).
Provides the correct output at the SPEAKER ZONE 1 connector for the new
Acoustimass ®module that came with your system. Always use "Normal" for
zone 1.
Not used in zone 1 for this system.
Provides the correct output (variable level) at the SPEAKER ZONE 2 connector
for Bose powered speaker systems AM 5P and AM 20P
Provides the correct output (fixed level) at the SPEAKER ZONE 2 connector for
other Bose powered speaker systems.
29