Accessing
the basic settings
Follow the steps below:
1.
Switch on the cooktop using the main switch
2.
Press the Timer symbol within the next 10 seconds until you hear a sound
signal and c _
lights up on the display (see illustration).
On/Off
Clean Lock/
Timer
0
1
0
2
0
3
Child Lock
Selecting the required
setting
3.
Press the Timer symbol until the indicator for the required function is displayed.
4.
Then select the required setting using the programmation zone. This new
setting will be shown in the element display on the upper right-hand side.
!
!
On/Off
Clean Lock/
Timer
0
1
o
2
o
3
Child Lock
5.
Press the Timer symbol again for more than 4 seconds, until you hear a sound
signal. The settings have been correctly stored.
27