Amana LW8463W Use And Care Manual page 13

5. SetWASH/RINSE
temperatures.
TEMPERA TURE -_
CP,tl_EOA
NOTE: The washer will provide a
cold rinse in all TEMPERATURE
settings except on models
equipped with a WARM wash
WARM rinse setting. DO NOT
use a warm rinse with permanent
press or other synthetic fabrics. A
warm rinse can cause wrinking in
some garments. Cold rinses will
save you money and energy and
will help reduce wrinkling in
permanent press and synthetics.
When using the DELICATE cycle,
a WARM dnse is not available. If
the WASH/RINSE selector is set
on WARM/WARM, it will still give
a COLD dnse. This is to assure
proper care of deliate items.
The Energy Saver settings,
marked with a dot (.), show which
temperature settings will use the
least energy.
6. Set LOAD SIZE (WATER
LEVEL) control. Use RESET if
agitation has started and more
water is needed.
Control Panel Light
Your washer is equipped with a
control panel light. This will
provide additional light to your
control panel and improve
visibility of the controls in a dimly
lit environment.
8/ZE- WA'f_R t.L=VB.
IMPORTANT: Holding the LOAD
SIZE (WATER LEVEL) control in
the RESET position can cause
flooding of the washer.
7. Select the cycle according to
the type of fabric being
washed. Push the timer knob
in and turn clockwise to the
desired cycle and wash time.
8. Putt the timer knob out to start
the water fill. Agitation will
begin when the water reaches
the level you selected.
The washer will stop (pause)
for approximately two minutes
before the wash and rinse
spins. Do not turn the timer
through these pauses. They
are part of the cycle.
Timer
Although the washer cycles are
automatic, the timer may be reset
to lengthen, shorten, or repeat a
portion of a cycle.
To set or reset the timer, push
timer knob in to stop the washer.
Hold timer knob in firmly while
turning it clockwise to the setting
desired. Pull timer knob out to
start the washer.
Wash
Regular
Use REGULAR setting for sturdy
items like work or play clothes
and most permanent press items.
You will also want to use
REGULAR agitation for items that
are heavily soiled.
Gentle
Use the GENTLE setting for
loosely woven fabrics, delicates
and sheer synthetics or cottons,
loads that can give off excessive
lint or for items that can be
damaged by REGULAR agitation.
Spin
Fast
You can use this spin speed for
most loads.
Slow
Use the SLOW spin speed for
items that wdnkle easily, like
lightweight synthetics, delicates
or lightweight permanent press,
L©J
¢Pwlews_
3:'306 13