Table of Contents
Advertisement
Press the SET
button until SET
indicator is next
to clock position
on the display
When setting the time or altering the temperature settings, if a period exceeding
65 seconds is allowed to elapse between button presses then the CentaurStat will
automatically return to the run position. Any alterations made since the last press of the
ENTER button will not be recognised.
The CentaurStat 1 has six temperature settings
per 24 hours.
These all have different start times and
temperature settings. The default factory settings
are shown opposite. Should you want to alter
these default times and temperatures, proceed
as per the instructions on page 5.
The CentaurStat has two user displays, by pressing the PLUS and MINUS buttons
simultaneously, the user can toggle between either Display 1 or Display 2.
Display 1 - Shows current time
and target temperature
4
Setting the Time of Day
Use the PLUS
and MINUS
buttons to
adjust the time
Time and Temperature Settings
Display Features
Press
ENTER
Period Times
1
2
3
4
5
6
Display 2 - Shows current and
target temperature
Press the SET
button until
SET indicator is
returned to the
RUN position
DEFAULT SETTINGS
6:00am
8:30am
11:30am
1:30pm
5:00pm
10:00pm
Temps.
20ºC
18ºC
20ºC
18ºC
21ºC
15ºC
Advertisement
Table of Contents
