Changing Times/Target Temperatures - Horstmann CentaurStat 7 User Operating Instructions Manual

Changing the Times and Target Temperatures
Press the SET button
until the SET indicator is
next to PROG position
The target temperature
setting for the 1st period
will now flash. Use the
PLUS and MINUS buttons
to alter the target
temperature if required
Press ENTER
Use the PLUS button
B
to select a day to copy
the programme to
Press the SET
button until the SET
C
indicator is returned
to the RUN position
A
The day setting indicator

will now flash. Use the PLUS
and MINUS buttons to alter
the day to be programmed

Press ENTER
Repeat for remaining

5 time and
temperature periods
The copy indicator will now illuminate, this will
allow the complete programme to be duplicated
into any or all of the remaining days:
Go to B to continue or go to C to finish
If the copy feature is not required press ENTER
and go to A to programme the remaining days

Press ENTER

The time setting for the
1st period will now flash.

Use the PLUS and MINUS
buttons to alter the start
time if required

Press ENTER
or go to C to finish
Repeat for all days that
require this programme.

The day indicator will remain
illuminated for days which
have already been copied to
To programme the remaining
days if alteration to preset
times are required,
press ENTER and go to A
or go to C to finish
Press ENTER
5