Sony Bravia KDL-32W650A Operating Instructions Manual page 25

Preparing for the
installation of the TV
1
Remove the screws from the rear of the
TV. Be sure to store the removed screws
in a safe place, keeping them away from
children.
Soft cloth
~
• When removing the Table-Top Stand from
the TV, lay the display face down on a stable
work surface that is larger than the TV.
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on
the work surface.
• Once the Stand Necks are detached from
the Stand, be sure to keep the Stand Necks
and screws in a safe place.
• When attaching the Table-Top Stand again,
be sure to fasten the screws (previously
removed) to the original holes on the rear of
the TV.
2
Make sure the pin (on the Stand
Protector) is inserted into the hole on the
Stand. Fold up the Stand Protector once
the pin is inserted into the Stand.
Stand Protector
Pin
3
Attach the Mounting Hooks (on the
Stand) using the supplied screws.
Attach the Spacers to the holes
indicated by the triangle marks
Screw
(+PSW 6 x 12)
Soft cloth
(Continued)
Stand
.
Mounting
Hook
Spacer
2
×
25