IP Filter Settings
Items
Enable this
Rule
IP Address
Protocol
Filter Mode
Date Define
Time Define
Action
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
IP Filter Rule List
Lists the IP Filter Settings you have added before. Click on the list to change
configuration, or the Delete button to delete the list.
Information
Mark to enable the configuration, and clear to disable.
Fill in the IP address that you are going to filter.
Select the protocol type of TCP, UDP or Both
Select the filter mode of Always or by Schedule
For filter mode of by Schedule, you have to define the
filter date and time.
After configure the above settings, click Add to add a
new list in the following IP Filter Rule List. The Change
button can be used to change the configuration.
34