Section 6: Accidental Release Measures; Section 7: Handling And Storage - 3M Designjet H35000 - Commercial Printer Material Safety Data Sheet

3M MATERIAL SAFETY DATA SHEET 3M Black Inkjet Ink 5495
5.1 FLAMMABLE PROPERTIES
Autoignition temperature
Flash Point
Flammable Limits - LEL
Flammable Limits - UEL
5.2 EXTINGUISHING MEDIA
Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide).
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures:
containers and surfaces cool and prevent explosive rupture. Wear full protective equipment (Bunker Gear) and a self-contained
breathing apparatus (SCBA).
Unusual Fire and Explosion Hazards:
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.

SECTION 6: ACCIDENTAL RELEASE MEASURES

Accidental Release Measures: Observe precautions from other sections. Call 3M- HELPS line (1-800-364-3577) for more
information on handling and managing the spill. Evacuate unprotected and untrained personnel from hazard area. The spill should be
cleaned up by qualified personnel. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical
ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition
source and could cause flammable gases or vapors in the spill area to burn or explode. Contain spill. For larger spills, cover drains
and build dikes to prevent entry into sewer systems or bodies of water. Working from around the edges of the spill inward, cover with
bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry.
Collect as much of the spilled material as possible. Clean up residue with an appropriate solvent selected by a qualified and
authorized person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and MSDS. Collect the
resulting residue containing solution. Place in a closed container approved for transportation by appropriate authorities. Dispose of
collected material as soon as possible.
In the event of a release of this material, the user should determine if the release qualifies as reportable according to
local, state, and federal regulations.

SECTION 7: HANDLING AND STORAGE

7.1 HANDLING
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Avoid breathing of vapors,
mists or spray. Avoid skin contact. Avoid skin contact with hot material. Avoid eye contact with vapors, mists, or spray. Avoid
contact with oxidizing agents.
7.2 STORAGE
Store away from heat. Store out of direct sunlight. Store away from oxidizing agents.
_________________________________________________________________________________________________
No Data Available
> 200 ºF [Test Method: Closed Cup]
No Data Available
No Data Available
Water may not effectively extinguish fire; however, it should be used to keep fire-exposed
Closed containers exposed to heat from fire may build pressure and explode.
03/12/2007
Page 3 of 7