Connector, LED and button description:
2.4 Install battery backup module
To install the IP SAN storage with a battery backup module, please follow the procedure.
Gigabit ports (x4).
LED (from left to right)
Controller Health LED:
Green Controller status normal or in the booting.
Red Other than above status.
Master Slave LED: (only for DSN-6120)
Green Master controller.
Off Slave controller.
Dirty Cache LED:
Orange Data on the cache waiting for flush to disks.
Off No data on the cache.
BBM LED:
Green BBM installed and powered
Off No BBM
BBM Status Button:
When the system power is off, press the BBM status button,
if the BBM LED is Green, then the BBM still has power to
keep data on the cache. If not, then the BBM power is ran
out and cannot keep the data on the cache anymore.
Management port.
Console port.
RS 232 port for UPS.
SAS JBOD expansion port.
Power switch.
23