LG 37LBSD Owner's Manual page 105

Z
X
21.
22.
23.
24.
Blue Adjustment (Command: k $)
To adjust blue in color temperature.
TransmissiOn [k] [$][ ][Set iD][ ][Data] [Cr]
Data Min: 0 - Max: C8
*Refer to 'Real data mapping 2: See page 103.
AcknOwledgemen_ [$][ ][Set ID][ ][OK/NG] [Data] [x]]
ISM Method (Command: j p)
(Only Plasma TV model)
To avoid having a fixed image remain on screen.
Transmission [j ][p][] [Set ID] [ ] [Data] [Cr]
Data 1 : Inversion 2: Orbiter
4: White Wash 8: Normal
Acknowledgemen_ [p][] [Set ID] [ ] [OK/NG] [Data] [x]
Low Power (Command: j q)
(Only Plasma TV model)
To control the low power function on/off.
Transmission [)][q][] [Set ID][] [Data] [Cr] .....
Data O: Low Power off
I: Low Power on
ACknowledgemen_ [q][] [Set ID] [ ] [OK/NG] [Data] [x]
Channel Tuning (Command: m a)
To tune channel to following physical/major/minor number.
Traasmissio_[ m] [a][] [get iD][] [DataO] [ ] [Data i ]
[] [Data2] [ ] [Data3] [ ] [Data4] [ ] [Data5] [Cr]
Digital channels have a Physical, Major, and Minor channel
number. The Physical number is the actual digital channel
number, the Major is the number that the channel should
be mapped to, and the Minor is the sub-channel. Since
the ATSC tuner automatically maps the channel to the
Major number, the Physical number is not required when
sending a command.
Data 0: Physical Channel Number
NTSC air: 02-45, NTSC cable: 01,0E-7D
ATSC air: 01-45, ATSC cable: 01-87
Data1 & 2: Major Channel Number
Data1: High byte Data2: Low byte
Two bytes are available for the Major and Minor, nor-
mally only the second byte is used.
Data3 & 4: Minor Channel Number
Not needed for NTSC.
104