Panasonic Viera TC-P42X3 Owner's Manual page 8

[]Assembling the pedestal
®4Fix securely with assembly screws '_,_A_y (Total 4 screws).
® Tighten screws firmly.
Pole
Front
Base
(image: TBLX0135)
[] Set-u p
_ Carry out work on a horizontal and level surface.
;_ Tighten screws firmly.
Arrow
mark
Bottom view
Rear side
Hole for pedestal
installation
Accessories
Assembly screws
(4 of each)
,_Ab
XYN5+F18FN
size (M5 x 18) (Silver)
,\B_ _
THEL078N (for 42")
THEL080N (for 46"/50")
size (M5 x 30) (Black)
Poles (2)
® @ or _ is printed at the
bottom of the poles.
Base (1)
Pole
(image: TC-P50X3)
_ Fix securely with assembly
screws _B_(Total 4 screws).
Do not disassemble or modify the pedestal.
;_ Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than that provided with this TV.
® Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if (t becomes warped or physically damaged.
_* If you use the pedestal when (t is physically damaged, personal injury may result. Contact your nearest Panasonlc
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and (t might fall over and become damaged, and personal injury may result.
8