Table of Contents
Advertisement
_GETTING
STARTED
Aligning the colors
• This projection TV uses three separate TV tubes: a red one, a green one, and a blue one.
The red, green, and blue images are projected onto the screen where they converge to
form a full color picture. You can see a clear picture only when they converge correctly.
• Convergence may drift over time or if you move the TV. If you can see clear images on
the screen, skip this procedure.
ENTER
<
>
v
A
VOLUME
CHANNEL
,,,
- CABLE
MUTE
WNIOEO
TIMER
,v= ®®®
STOP SOURCE
PLAY PiP
STILL
LOCATE
SWAP
TOgHIBA
This adjustment should be made after the TV has been on for at least 30
minutes.
To check and align the colors
Press MENU, then press < or v until
the PICTURE menu appears.
CONTRAST
BR I GHTNESS
COLOR
,n--,
TINT
"-t-"
SHARPNESS
Press • (or •)until
"CONVERGENCE"
is highlighted.
FLESH
TONE
NOI SE
•
@
3
Press < or _ to display the center
CONVERGENCE menu.
If alignment is correct, there will be one
vertical and one horizontal white line.
BLUE
+
PUSH
ENTER
TO
SELECT
COLOR
PUSH
EXIT
;
_>
TO
SELECT
POSITION
_O_
4
If you see separate colored lines, you
have to align the colors.
Press ENTER to select "RED" or "BLUE."
The selected color is highlighted.
BLUE
+
PUSH
ENTER
TO
SELECT
COLOR
PUSH
EXIT
<_>
TO
SELECT
POSITION
f_
5
Press the" • (up)", " • (down)",
" <
(left)" or " _ (right)" button to converge
the red or blue line into the green line.
When color convergence is correctly
adjusted, you will see two single white
lines.
REU_
+
PUSH
ENTER
TO
SELECT
COLOR
PUSH
EXIT
<_>
TO
SELECT
POSITION
(_
24
Advertisement
Table of Contents
