Using Slideshow (Eb-W6 Only); Image Files That Can Be Projected In A Slideshow; Basic Slideshow Operations; Starting Slideshow - Epson EB S6 User Manual

Using Slideshow (EB-W6 only)

You can make presentations by connecting the projector to a digital
camera, USB storage device or SD card. The image files stored on
these devices can be projected directly. This makes projection easy,
since it is not necessary to connect a computer.

Image Files that can be Projected in a Slideshow

The image files that can be projected in a slideshow are as follows.
File type
Type
(extension)
Still images .jpg
only
• USB storage devices that have a security function cannot
q
be used.
• Due to the characteristics of JPEG files, if the
compression ratio is high the image may not be projected
properly.
• Movie files cannot be projected.
Comment
Shall be JPEG files that support the Exif
standard.
Images with a resolution above 8176 x
6144 cannot be projected.
The horizontal/vertical pixel count of the
image shall be multiples of 8.

Basic Slideshow Operations

The following explains the basic operating method for Slideshow.
The following operations are all performed by remote control. Therefore
the button names refer to buttons on the remote control.

Starting Slideshow

f
Procedure
Slideshow starts automatically when the projector is
connected to a USB storage device or SD card.
Refer to the following for how to connect a USB storage device or SD
card.
Connecting a USB storage device: s
Connecting a SD card: s p.80
During projection of images from another source, the
q
projector will switch to the device you connect as soon as
you press the [Slideshow] button.
p.79
90