Color Setup Options - Fiery KM-C2230 Configuration Manual

4
4-50 Performing Setup from the Control Panel
Symbol Set
ASCII/Roman-8/ECMA-94 L1/PC-8... [Desktop]
This option lets you choose the symbol set that best matches the needs of users
printing to the Fiery X3e.
Font Source
Internal/Softfont [Internal]
Specify the font source to be enabled.
Font Number
0-999 [0]
The font number designates the default font for the Fiery X3e.
To determine font numbers, print the internal PCL Font List. The standard fonts are
listed in order. The font numbers, however, are not displayed.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in PCL Setup; select No to return to the main
Setup menu without making any changes.

Color Setup options

Color Setup allows you to set defaults the Fiery X3e uses to control color output.
Mac OS and Windows users who use the printer drivers provided on the User
Software CD can override most of these defaults on a job-by-job basis. However, users
printing from UNIX or DOS command lines cannot override defaults from their
applications. Therefore, you must set defaults in Color Setup.
The preferred method for setting color defaults is to use Color Setup, part of the
ColorWise Pro Tools. The color options are described in this section for your
reference. For more information about these defaults, see the Printing Guide and
Color Guide.
In addition to the defaults described in this section, additional settings are
N :
OTE
available to Mac OS and Windows users from the printer drivers.