Usb 2.0 Connectors - Asus P8Z68-V LE User Manual

5. Intel Z68 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1/2 [gray])
®
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
chipset.
P8Z68-V LE
P8Z68-V LE SATA 6.0Gb/s connectors
•
•
•
6. USB 2.0 connectors (10-1 pin USB5~12)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with the USB 2.0 specification that supports up
to 480Mbps connection speed.
P8Z68-V LE
P8Z68-V LE USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
ASUS P8Z68-V LE
Rapid Storage Technology through the onboard Intel
®
These connectors are set to [AHCI Mode] by default. If you intend to create a
Serial ATA RAID set using these connectors, set the SATA Mode item in the
BIOS to [RAID Mode]. Refer to section SATA Configuration for details.
When using NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to
section SATA Configuration for details.
You must install Windows
Serial ATA hard disk drives. The Serial ATA RAID feature is available only if
you are using Windows
SATA6G_2 SATA6G_1
XP Service Pack 3 or later versions before using
®
XP SP3 or later versions.
®
USB1112 USB910
PIN 1 PIN 1
USB78 USB56
PIN 1 PIN 1
Z68
®
1-31