B Regulatory Compliance; Safety Regulations; Place Battery Marking - Intel D945PLNM Product Manual

B Regulatory Compliance

This appendix contains the following regulatory compliance information for Desktop Board
D945PLNM:
•

Safety regulations

•
European Union Declaration of Conformity statement
•
Product Ecology statements
•
Electromagnetic Compatibility (EMC) regulations
•
Product certifications

Safety Regulations

Desktop Board D945PLNM complies with the safety regulations stated in Table 13 when correctly
installed in a compatible host system.
Table 13. Safety Regulations
Regulation
UL 60950-1:2003/
CSA C22.2 No. 60950-1-03
EN 60950-1:2002
IEC 60950-1:2001, First Edition

Place Battery Marking

There is insufficient space on this desktop board to provide instructions for replacing and disposing
of the Lithium ion coin cell battery. For system safety certification, the statement below or an
equivalent statement is required to be permanently and legibly marked on the chassis near the
battery.
CAUTION
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled
where possible. Disposal of used batteries must be in accordance with local environmental
regulations.
Related Links
For information about replacing the battery, go to page 49.
Title
Information Technology Equipment – Safety - Part 1: General
Requirements (USA and Canada)
Information Technology Equipment – Safety - Part 1: General
Requirements (European Union)
Information Technology Equipment – Safety - Part 1: General
Requirements (International)
59