Intel Desktop Board D945PLNM Technical Product Specification
Table 4 describes the LED states when the board is powered up and the 10/100 Mbits/sec LAN
subsystem is operating.
Table 4.
LAN Connector LED States
LED Color
LED State
Green
Off
On
Blinking
Yellow
Off
On
1.9.2 Alert Standard Format (ASF) Support
The board provides the following ASF support for PCI Express x1 bus add-in LAN cards and PCI
Conventional bus add-in LAN cards installed in PCI Conventional bus slot 2:
•
Monitoring of system firmware progress events, including:
⎯ BIOS present
⎯ Primary processor initialization
⎯ Memory initialization
⎯ Video initialization
⎯ PCI resource configuration
⎯ Hard-disk initialization
⎯ User authentication
⎯ Starting operating system boot process
•
Monitoring of system firmware error events, including:
⎯ Memory missing
⎯ Memory failure
⎯ No video device
⎯ Keyboard failure
⎯ Hard-disk failure
⎯ No boot media
•
Boot options to boot from different types of boot devices
•
Reset, shutdown, power cycle, and power up options
1.9.3 LAN Subsystem Software
LAN software and drivers are available from Intel's World Wide Web site.
For information about
Obtaining LAN software and drivers
32
Condition
LAN link is not established.
LAN link is established.
LAN activity is occurring.
10 Mbits/sec data rate is selected.
100 Mbits/sec data rate is selected.
Refer to
Section 1.2, page 15