ASROCK H61 Pro User Manual page 38

Short Duration Power Limit
Use this item to configure short duration power limit in watts. The default
value is [Auto].
Primary Plane Current Limit
Use this item to configure the maximum instantaneous current allowed for
the primary plane. The default value is [Auto].
Secondary Plane Current Limit
Use this item to configure the maximum instantaneous current allowed for
the secondary plane. The default value is [Auto].
GT OverClocking Support
Use this item to enable or disable GT OverClocking Support. The default
value is [Disabled].
DRAM Timing Configuration
Load XMP Setting
Use this to load XMP setting. Configuration options: [Auto], [Default], [Profile
1] and [Profile 2]. The default value is [Auto].
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assign the appropriate frequency automatically.
DRAM Timing Control
DRAM tCL
Use this item to change CAS# Latency (tCL) Auto/Manual setting. The
default is [Auto].
DRAM tRCD
Use this item to change RAS# to CAS# Delay (tRCD) Auto/Manual setting.
The default is [Auto].
38