Asus P5Q - Motherboard - ATX User Manual page 148

Configuring Super Speed
This mode allows two hard disks to access data simultaneously. The dual channel
design can largely enhance hard disk transfer rate.
•
•
To start Super Speed configuration:
Click Super Speed from the main screen.
1.
If you are in EZ Backup mode,
click Mode Change to return to
the main screen.
Click Apply to start configuration.
2.
3. A warning message appears, reminding you that all original data in the two
hard disks will be erased. Click Ok to continue.
The setup is completed. Click Ok to
4.
restart your computer at once.
After restarting your computer, the Drive
5.
Xpert icon on the Windows
turns green to indicate that Super Speed is
set up successfully.
If one hard disk is corrupt, all data in both hard disks will be lost.
4-36
We recommend that you use two new hard disks for this setup.
This setup erases all original data in both hard disks. Ensure to back up all
data in the hard disks before using this setup.
®
notification area
Chapter 4: Software support