Asus P5P41TD User Manual page 33

4. Serial ATA connectors (7-pin SATA1~4)
These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk
and optical disk drives. The Serial ATA 3Gb/s is backward compatible with Serial ATA
1.5Gb/s specification. The data transfer rate of the Serial ATA 3Gb/s is faster than the
standard parallel ATA with 133 MB/s (Ultra DMA133).
P5P41TD
P5P41TD SATA connectors
Install the Windows
5. USB connectors (10-1 pin USB56, USB78)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
P5P41TD
P5P41TD USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB module cable is purchased separately.
ASUS P5P41TD
SATA1
SATA3
XP Service Pack 2 or later version before using Serial ATA.
®
USB56
PIN 1
SATA2
SATA4
USB78
PIN 1
1-23