Table of Contents
Advertisement
Table 25. BIOS Setup Configuration Jumper Settings
Function/Mode
Jumper
Setting
Normal
1-2
Configure
2-3
Recovery
None
Configuration
The BIOS uses current configuration information and passwords for
booting.
After the POST runs, Setup runs automatically. The maintenance menu
is displayed.
Note that this Configure mode is the only way to clear the BIOS/CMOS
settings. Press F9 (restore defaults) while in Configure mode to restore
the BIOS/CMOS settings to their default values.
The BIOS attempts to recover the BIOS configuration. A recovery CD
or USB flash drive is required.
Technical Reference
51
Advertisement
Table of Contents
