11. Tap the Font size field to change the size of the fonts
used on the device within menus, options, etc. Choose
from: Tiny, Small, Normal, Large, or Huge.
12. Tap the Mono audio field to enable stereo audio to be
compressed into a single mono audio stream for use
with a single earbud/earphone.
13. Tap the Turn off all sounds field to mute every sound
made by the device during taps, selections,
notifications, etc.
14. Tap the Tap and hold delay field to select a time interval
for this action. Choose from: Short, Medium, or Long.
Developer Options
Use the Developer options to set options for application
development.
USB Debugging
When enabled, allows debugging when the device is
attached to a PC by a USB cable.
Note: This setting is used for development purposes.
1. From the Home screen, tap
Developer options.
138
Development Device ID
Allow Mock Locations
Desktop Backup Password
Settings
2. Tap USB debugging to enable or disable the setting.
When enabled, a check mark appears in the check box.
The identification number for your device when using it as a
development tool displays in this field.
This setting is used by developers when developing
location-based applications.
Note: This setting is used for development purposes.
1. From the Home screen, tap
Developer options.
2. Tap Allow mock locations to enable or disable the
setting.
When enabled, a check mark appears in the check box.
Protect the desktop with a backup password ID.
1. From the Home screen, tap
Developer options.
2. Tap Desktop backup password.
Settings
Settings