Table of Contents
Advertisement
2.7
Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
2.8
Installing Windows
/ XP / XP 64-bit With RAID Functions
If you want to install Windows
on your SATA / SATA2 HDDs with RAID functions, please refer to the document at
the following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.9
Installing Windows
/ XP / XP 64-bit Without RAID Functions
If you want to install Windows
bit OS on your SATA / SATA2 HDDs without RAID functions, please follow below
procedures according to the OS you install.
2.9.1
Installing Windows
Functions
If you want to install Windows
RAID functions, please follow below steps.
Using SATA / SATA2 HDDs without NCQ and Hot Plug functions (IDE mode)
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [IDE].
STEP 2: Install Windows
22
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
XP / XP 64-bit Without RAID
®
XP / XP 64-bit on your SATA / SATA2 HDDs without
Advanced screen
®
XP / XP 64-bit OS on your system.
ASRock 970 Pro2 Motherboard
TM
/ Vista
TM
TM
/ Vista
64-bit / XP / XP 64-bit
TM
/ Vista
TM
TM
/ Vista
64-bit / XP / XP 64-
Storage Configuration.
TM
64-bit
TM
64-bit
Advertisement
Table of Contents
